Stamping Machines Setup Checklist for Seamless Production Runs

To ensure seamless production runs and optimized efficiency in stamping production, it is vital to perform a thorough setup process of the stamping machine. This checklist involves steps such as die installation verification, stroke adjustment check, material feed system setup, lubrication system preparation, first article inspection, press controls verification, safety device testing, and production rate setting. By adhering to these steps, you'll prime the stamping machine for efficient operations and high-quality results.

Die Installation Verification

• ▢ Check alignment of die
• ▢ Confirm secure fastening of die

Stroke Adjustment Check

• ▢ Verify correct stroke length
• ▢ Ensure proper stroke speed

Material Feed System Setup

• ▢ Confirm feed mechanism is operational
• ▢ Check material alignment

Lubrication System Preparation

• ▢ Verify adequate lubrication levels
• ▢ Ensure correct lubrication points

First Article Inspection

• ▢ Check first output for quality
• ▢ Verify measurements and tolerances

Press Controls Verification

• ▢ Confirm all controls function
• ▢ Test emergency stop feature

Safety Device Testing

• ▢ Check all safety mechanisms
• ▢ Ensure all guards are in place

Production Rate Setting

• ▢ Verify correct speed setting
• ▢ Check machine cycle time

Defects Section

Operators can document identified issues here

Operator Acknowledgment

I certify that I have checked all the above points and all are in good condition