Drill Presses Cleaning Checklist to Extend Equipment Lifespan

Equipment Identification: ID/Number:______, Hours/Mileage:______

Operator: Name:______, Date:______

Chuck and Spindle Cleaning

• ▢ Clean the chuck jaws with a brush
• ▢ Inspect the spindle for any signs of damage or wear

Note: Never use metal brush on chuck jaws. It can cause damage.

Table Surface Cleaning

• ▢ Wipe down the table surface with a soft cloth
• ▢ Check for any rust or damage on the table surface

Note: Oil the table surface for rust protection after cleaning.

Column and Base Inspection

• ▢ Check the column and base for any signs of cracks or damage
• ▢ Ensure they are free from any dirt or debris

Belt Tension Check

• ▢ Check the tension on the drive belt
• ▢ Make sure the belt is in good condition without any signs of wear or damage

Motor Ventilation Cleaning

• ▢ Clean the motor ventilation holes with compressed air
• ▢ Check that the ventilation holes are free of debris

Lubrication Points Service

• ▢ Lubricate all moving parts of the drill press
• ▢ Use proper lubricant as per the manufacturer's guideline

Electrical Connection Inspection

• ▢ Check all electrical connections for looseness or damage
• ▢ Ensure the power cord and plug are in good condition

Safety Guard Cleaning

• ▢ Ensure safety guards are clean and free of dirt
• ▢ Check that safety guards are not damaged

Defects

Please document any issues here:____________________________________________________

Operator Acknowledgement: Signature:______