Water and wastewater utilities running SCADA alongside disconnected maintenance platforms lose critical response time on every alarm. SCADA detects the anomaly — but someone still has to manually create a work order, find a technician, and dispatch them. That gap averages 4.2 hours and costs 4x more than a planned repair. When SCADA talks directly to your CMMS, every detectable failure becomes a preventable one. Connect your SCADA to Oxmaint — free trial, no credit card, live in under 60 minutes.
The Cost of Disconnected SCADA and Maintenance Systems
4.2 hrs
Average delay between SCADA alarm and work order creation without integration — the window where failures escalate
67%
Of unplanned equipment failures at water utilities occur on assets where SCADA flagged anomalies days or weeks earlier
4x
Higher cost of emergency repairs versus planned maintenance — the multiplier SCADA-CMMS integration eliminates
89%
PM compliance rate achievable with automated SCADA-triggered work orders versus 52% with manual processes
Why Disconnected SCADA and CMMS Systems Fail Water Utilities
In most utilities, SCADA data lives on one screen and maintenance operations live in another system entirely. When a lift station pump alarm fires at 2 AM, someone has to notice it, interpret the severity, manually create a work order, and find a technician — a process that averages 4+ hours and fails when the operator does not recognise the alarm as maintenance-critical. Oxmaint eliminates this gap by connecting directly to SCADA via OPC-UA, Modbus, and REST API. Alarms auto-generate work orders with full asset context, the right technician is dispatched in minutes, and SCADA confirms resolution when the repair closes. Book a demo to see SCADA-CMMS integration configured for your utility.
SCADA Detects It. Oxmaint Fixes It. Automatically.
Every SCADA alarm that requires maintenance action becomes a tracked, routed, closed work order — without a single manual step. Free to start. Live in under 60 minutes.
How Oxmaint SCADA-CMMS Integration Works
Oxmaint connects to your SCADA system and turns alarm data into maintenance action — automatically, with full compliance documentation built in.
Core Capability
Auto Work Orders from SCADA Alarms
SCADA threshold breaches — pump temperature, pressure drop, flow anomaly, chemical dosing drift — auto-generate work orders with asset ID, alarm severity, and full maintenance history attached. OPC-UA, Modbus, and REST API integration. No manual entry. Bi-directional status sync back to SCADA on repair completion.
Core Capability
Predictive Maintenance from SCADA Trend Data
AI models trained on SCADA sensor trends detect degradation patterns — vibration drift, temperature creep, flow decline — and generate predictive work orders 10–30 days before failure. Offline mobile for remote pump stations and lift stations. Compliance-ready audit trails generated automatically from every work order.
Implementation Roadmap
Most water utilities complete full SCADA-CMMS integration within 21 days — no IT project, no SCADA downtime.
Week 1
Asset Registry & SCADA Mapping
Register all utility assets. Map each to its SCADA tag and alarm thresholds. Configure asset hierarchy.
Week 2
SCADA Integration & Automation
Connect SCADA via OPC-UA, Modbus, or REST API. Configure alarm-to-work-order rules and technician routing. Test with live data.
Week 3
Mobile & Compliance Go-Live
Deploy mobile app with offline mode. Configure compliance templates per jurisdiction. Set up regulatory export formats.
Ongoing
Predictive Analytics & Optimization
AI learns from SCADA trends. Predictive work orders replace reactive alarms. Rolling CapEx forecasts update automatically.
Every SCADA Alarm That Goes Unactioned Is a Failure Waiting to Happen.
Oxmaint turns SCADA data into maintenance action — automatically. No manual work orders. No delayed dispatch. No compliance gaps. Running in 21 days.
Regional Compliance Coverage
Oxmaint builds audit-ready documentation into every work order automatically — configured per jurisdiction.
USA
EPA Clean Water Act and Safe Drinking Water Act. OSHA confined space and LOTO documentation. AWWA asset management alignment. CMOM programme documentation. State environmental agency reporting.
Canada
Provincial drinking water standards (Ontario Reg 170/03, BC DWPR). CSA water treatment equipment standards. CCME guidelines. Provincial OH&S regulations. PIPEDA data privacy.
Australia
Australian Drinking Water Guidelines (ADWG). WHS Act safety compliance. AS/NZS equipment standards. State water authority licence conditions. ISO 55001 alignment.
Germany
TrinkwV drinking water compliance. WHG federal water management. DVGW technical standards. BetrSichV equipment safety. Full GDPR data handling.
UK
OFWAT regulatory compliance. DWI drinking water standards. Environment Agency discharge permits. Water Industry Act 1991. UK GDPR data protection.
Saudi Arabia
SWCC and NWC operational standards. MEWA environmental compliance. Saudi Building Code utility provisions. PDPL data governance.
Oxmaint vs Competitors: SCADA-CMMS Comparison
Swipe to view full comparison table
| Capability |
Oxmaint |
MaintainX |
UpKeep |
Fiix (Rockwell) |
Limble CMMS |
IBM Maximo |
Hippo (Eptura) |
| SCADA Integration |
OPC-UA, Modbus, REST API |
Not available |
Limited API |
Rockwell ecosystem |
Not available |
Full (complex) |
Not available |
| Auto Work Orders from SCADA |
Real-time, auto-routed |
Manual entry |
Manual entry |
Configurable |
Manual entry |
Configurable |
Manual entry |
| Predictive from SCADA Trends |
AI-driven, built-in |
Not available |
Add-on |
Add-on |
Not available |
Included (complex) |
Not available |
| Bi-Directional Status Sync |
Real-time two-way |
Not available |
Not available |
Rockwell only |
Not available |
Custom build |
Not available |
| Water Utility Compliance |
EPA, OFWAT, DWI, AWWA |
General compliance |
General compliance |
Manufacturing focus |
General compliance |
Configurable |
General compliance |
| Offline Mobile |
Full offline + sync |
Online only |
Limited offline |
Limited offline |
Limited offline |
Limited |
Online only |
| Multi-Site Utility Dashboard |
Built-in, real-time |
Basic multi-site |
Basic multi-site |
Enterprise tier |
Basic multi-site |
Enterprise |
Basic multi-site |
| Deploy Time |
7–21 days |
2–3 weeks |
2–4 weeks |
4–12 weeks |
1–2 weeks |
6–18 months |
2–6 weeks |
| Pricing |
Free tier + transparent |
Per-user tiers |
From $45/user/mo |
Custom quote |
Starter plan |
$100K+ deploy |
Per-user tiers |
Proven Results
PM compliance rate with automated SCADA-triggered work orders89%
Reduction in reactive emergency equipment failures76%
Reduction in compliance audit preparation time84%
Reduction in total maintenance spend in first year41%
21 Days
Full SCADA-CMMS integration deployed with PM automation live
$0
Implementation fees — free to start, free migration support
23 min
Average SCADA alarm to technician dispatch time (from 4.2 hours)
99.9%
Platform uptime SLA — utility records always accessible
Your SCADA System Already Knows What Is Failing. Oxmaint Makes Sure It Gets Fixed.
89% PM compliance. 76% fewer emergency failures. 84% less audit prep time. Running in 21 days with zero implementation fees.
Data Security
Water utility SCADA data is critical infrastructure. Oxmaint protects it to enterprise standards.
AES-256
Encryption
All SCADA data, maintenance records, and compliance documentation encrypted at rest and in transit.
SOC 2 Type II
Certified Security
Annual independent audit. Satisfies utility enterprise contract security requirements globally.
RBAC
Access Control
Role-based access from operator to director. Full audit log on every data access event.
GDPR
Global Compliance
GDPR, UK GDPR, PIPEDA, and PDPL compliant. European data residency options available.
Frequently Asked Questions
What SCADA systems does Oxmaint integrate with?
Any SCADA exposing OPC-UA, Modbus TCP/IP, or REST API — including Wonderware, GE iFIX, Ignition, Siemens WinCC, OSIsoft PI, and VTScada. Most integrations are live within 3–5 days.
Sign up free to confirm compatibility.
Does integration require SCADA downtime?
No. Oxmaint connects as a read/write subscriber to your SCADA data bus — no system modifications, no firmware updates, no interruption to monitoring or control.
Book a demo to review the architecture.
How does compliance work across different jurisdictions?
Every work order generates jurisdiction-appropriate records automatically — EPA/AWWA for USA, OFWAT/DWI for UK, ADWG for Australia, TrinkwV for Germany, provincial standards for Canada, SWCC/NWC for Saudi Arabia. One-click export.
Start free — compliance templates deploy automatically.
Can Oxmaint manage SCADA integration across multiple utility facilities?
Yes. Multi-facility SCADA integration from a single portfolio dashboard. Each facility connects its own SCADA while sharing PM schedules and compliance frameworks. Role-based access ensures proper data isolation.
Book a demo with your facility list.
Your Next Regulatory Audit Will Ask for Digital Maintenance Records. Will You Be Ready?
SCADA-triggered work orders. Predictive maintenance from trend data. Multi-jurisdiction compliance automation. Offline mobile for remote sites. Enterprise security. Free to start. Running in 21 days.
